"EdgeRouter X SFP" 修訂間的差異
出自 CH 維基百科
| 行 29： | 行 29： | ||
'''Firewall Policie'''s | '''Firewall Policie'''s | ||
WAN_IN | WAN_IN | ||
| − | 新增規則:Basic頁面 Action->Accept Destination頁面 輸入port | + | 新增規則:Basic頁面->Action->Accept Destination頁面->輸入port |
'''PPPOE Relay''' | '''PPPOE Relay''' | ||
於 2019年7月17日 (三) 10:55 的修訂
IPv6 of Hinet pppoe P.S. eth0為WAN $sudo su #configure #set interfaces ethernet eth0 pppoe 0 ipv6 enable #set interfaces ethernet eth0 pppoe 0 ipv6 address autoconf #set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 0 #set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 0 prefix-length 64 #set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 0 interface switch0 #set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 0 interface switch0 service slaac #set interfaces switch switch0 ipv6 router-advert prefix ::/64 #commit #save #exit #reboot #y
硬體加速 #configure #set system offload hwnat enable #commit #save P.S.建議重啟
Port Forwarding WAN interface pppoe0 Auto firewall no Enable LAN interface swtch0 Firewall Policies WAN_IN 新增規則:Basic頁面->Action->Accept Destination頁面->輸入port
PPPOE Relay #sudo pppoe-relay -S eth0 -C Switch0
UPnP Wizards -> UPnP Internal interface:switch0 External interface:pppoe0 UPnP2 $sudo su #configure #set service upnp2 wan pppoe0 #set service upnp2 listen-on switch0 #set service upnp2 listen-on eth1 #set service upnp2 nat-pmp enable #set service upnp2 secure-mode enable #commit #save #exit
